Netgear Nighthawk routers are one of the great options to enjoy lag-free internet in every nook and cranny of your house. Though the Nighthawk routers work as per expectation still sometimes users experience a number of issues while using them. Among all, the most common issue that is affecting the surfing experience of the users is their Netgear Nighthawk router blinking amber continuously. If you are also experiencing the same issue, then here’s how to fix Netgear Nighthawk blinking amber issue in minutes. Keep reading!

Reasons Behind Netgear Nighthawk Router Blinking Amber

There are various reasons that can make your Netgear Nighthawk router blinking amber. All the LEDs on your Netgear Nighthawk router say something. For instance:

The Power LED

  • Solid amber: Your Netgear Nighthawk router is starting.

  • Blinking amber: The firmware is upgrading, or the reset button was pressed.

  • Solid white: Your router is ready.

  • Blinking white: Netgear router firmware is corrupted.

  • Off: Power is not being supplied to the router.

The Internet LED

  • Solid white: The Internet connection is ready. Have access to the Nighthawk router login page to check the internet connection.

  • Solid amber. The router has detected an Ethernet cable connection to the modem.

  • Off. No Ethernet cable is connected between the router and the modem.

2.4 GHZ Wireless LED

  • Solid white: The 2.4 GHz WiFi radio is operating.

  • Blinking white: Your Netgear Nighthawk router is sending or receiving WiFi traffic.

  • Off. The 2.4 GHz WiFi radio is off.

5 GHZ Wireless LED

  • Solid white: The 5 GHz WiFi radio is operating.

  • Blinking white: Your router is sending or receiving WiFi traffic.

  • Off. The 5 GHz WiFi radio is off.

USB 1 and USB 2

  • Solid white: A USB device is connected to the router and is ready.

  • Blinking white: A USB device is plugged in and is trying to connect.

  • Off: No USB device is connected.

Ethernet Ports 1 – 4

  • Solid white: A powered-on device is connected to the Ethernet port of your Netgear router.

  • Blinking: The Ethernet port is sending or receiving traffic.

  • Off: No device is connected to the Ethernet port.

WiFi On/ Off Button with LED

Pressing this button for a couple of seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.

WPS Button with LED

The WPS button lets you use the WPS to join the WiFi network without entering the router login password. During the WPS process, the WPS LED blinks white and then becomes solid.

No matter what color LED you get on your device, by following the troubleshooting tips given below, you can easily fix any issue with it apart from Netgear Nighthawk router blinking amber issue. Keep reading!

Power Cycle Your Netgear Nighthawk Router

  • Unplug your router along with your modem.

  • Wait for few minutes.

  • Plug in your modem then plug in your Netgear Nighthawk router.

Change the Wall Plug

Chances are your device is not receiving enough power supply and that is why you are experiencing Netgear Nighthawk router blinking amber issue. To fix it, change the power socket and make sure that it is receiving fluctuation-free power supply.

Connect Your Router to the Modem

  • Take an Ethernet cable. Make sure that the cable is in good condition.

  • Connect your Netgear router with your modem.

Is the Netgear Nighthawk router blinking amber issue fixed? If not, consider these couple of fixes as the last resort.

  • Update the Netgear router firmware.

  • Replace your modem or ask your service provider to upgrade your data plan.

  • Locate your Netgear Nighthawk router and your modem on an open and higher place. Do not place them over stabilizer or inside cabinet.

  • Place your Netgear router and modem away from corners, thick walls, windows, and fall ceilings.

  • Set up your Netgear Nighthawk router properly using 192.168.1.1.

Hopefully, by following the troubleshooting steps mentioned above, you are not experiencing Netgear Nighthawk router blinking amber issue. If the issue remains the same, contact our experts for instant help via comments.

LEAVE A REPLY

Please enter your comment!
Please enter your name here