Decking is a great way to accentuate the look of the house. These not only add to the aesthetic appeal of the house but, at the same time, also increases the value of the property. There are several decking options available in the market, and your focus should be to choose the one which is the strongest and of the best quality. Decks need the support of the footings, and for installing the footings, you need to dig the ground. So, the next question arises, is there an alternative way to install deck footings without digging. The answer is yes. There are options, and in this blog, we are going to unfold the same. There are different anchor and deck footing systems that are available, and you can use them as per the porosity of the soil.

When it comes to decking, then you have two options:

  1. Installing footings by digging the hole.
  2. Installing footings without digging holes in the ground

While installing the footing by digging a hole in an old and conventional method of installing footings, the ones that do not need digging can save the contractor’s time and energy. Installing deck footings without digging saves the blocks from frost heaving.

Installing deck footing without digging:

Step 1: To begin the process of installing deck footing without digging, you must first set the deck piers into a grid. These must be placed at 3-to-4 feet.  The placement of the joist should be such that it passes the pier on either side. It will seal the ends of the joists and hide the piers from view.

Step 2: Now, you need to measure the grid from one corner to another. For accuracy, you must use a measuring tape. Make sure that the length and the width are the same throughout.

Infographics: How Can You Install Deck Footings Without Digging? By ALL FOOTINGS SOLUTIONS


Step 3: once you have measured the grid, you must now ensure that the piers are on the same level. In case you notice that the piers are not on the same level, you must use a shovel to level it up. You can remove the soil for this. There are simple permissions that you get for building deck footings without digging. Usually, the thirty-inch rule applies to deck construction, and if you do not have permission for building a deck, then there can be penalties also if you do not adhere to the government rules then you will not be allowed to build a deck.

Step 4: Now, you need to add the planks and check the level again. For this, you can use a plank on top of the beam to see if they are at the same level as the others.

Step 5: Now attach the band joist to the ends of the joist. You can use vinyl-coated screws for this.

Step 6: After this, you need to align the deck planks. Use the vinyl-coated screws for this. To create uniformity, you can also use two screws as a spacer. It also creates a perfect way to drain out water.

Step 7: Chalk a line at the end of the planks and use a saw to trim the ends and create a uniform surface.

This is the simplest way to install deck footings without digging. You must not undermine the importance of levelling and creating a seamless surface.  One of the options is deck blocks, and the other is post anchors. In either case, you cannot undermine the role of a contractor.

Make sure that you choose only the best contractor for installing deck footings without digging Check the experience and portfolio of work before hiring them. Remember the right placement and levelling of deck footings without digging will give your deck a seamless surface.